App Store

Google Play

DK - Details page - Device banner - 894x1036

Nyd den ubegrænsede adgang til tusindvis af spændende e- og lydbøger - helt gratis

Lyt når som helst, hvor som helst 

MARK | DREW | BRUCE

We Built A Thing

In this episode, Mark is almost done with the dog kennel. He used Kreg's MortiseMate and likes it a lot. Drew is designing stuff for his new 3D printer. Bruce exposes domino tennons in his cutting board. Plus, a ton more!
 
 GIVEAWAY ANNOUNCEMENT!
Listen for details about our December giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway!
 
 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing
 
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
 
 -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 
 Become a patron of the show!
 http://patreon.com/webuiltathing
 
 OUR TOP PATREON SUPPORTERS
 -Tim Morrill
 -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
 -Brent Jarvis https://bit.ly/2OJL7EV
 -Ray Jolliff
 -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
 -Henry Lootens (@Manfaritawood)
 -Chris Simonton
 -Maddux Woodworks http://bit.ly/3chHe2p
 -Byrom’s Custom Woodworks
 -Bruce Clark
 -Will White
 -Cody Elkins (creator of the Jenny Bit)
 -Andy @ Mud Turtle Woodworks
 -Damon Moran
 -Monkey Business Woodworks
 -Rich from Woodnote Studio
 -AC Nailed It
 -Joe Santos from Designer's Touch Kitchen & Bath Studio
 -Aaron Yelton
 -Chad Green
 -Ryan Talley
 -Trevor
 -Mark Herrick @ Empty Nest Woodworks
 -Not That Aaron, the other one
 
 Support our sponsors:
 
TOOL CODES:
 -MagSwitch: “WBAT”
 -SurfPrep: “FISHER10”
 -Bumblechutes: “FISHER10”
 -Starbond: “BRUCEAULRICH”
 -Brunt Workgear: “GUNFLINT10”
 -Rotoboss: “GUNFLINT”
 -Merlin Moisture Meters: “FISHER10”
 -Montana Brand Tools: “GUNFLINT10”
 -Monport: “GUNFLINT6”
 -Stone Coat Epoxy: Gunflint
 -MAS Epoxy: FLINT
 -YesWelder: GUNFLINT10
 -Millner-Haufen Tool Co: “ULRICH20” for 20% off
 -SmartSquareTools.com: “FISHER10”
 -Camel City Mill: GUNFLINT10
 -Arbortech Tools: “BRUCEAULRICH” for 10% off
 -HighCountryTool.com: “FISHER10” for 10% off
 -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
 
 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
 https://amzn.to/2GP04jf 
 https://amzn.to/2TUrCr2
 
 ETSY SHOPS:
 Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
 
 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
 
 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
 
 Bruce's most recent video:
 https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
 
 Drew's most recent video:
 https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
 
 Mark's most recent video:
 https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
 
 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
 WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
 FISHER'S SHOP: www.instagram.com/fishersshop/
 BRUDADDY: www.instagram.com/brudaddy/
 GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
 
Music by: Jay Fisher (Thanks, Jay!)

282 - Hot Waxy Bruce or Bruce's Flickering Flame

In this episode, Mark has a dog kennel update and burns black walnut in his furnace. Bruce almost breaks a bit on the CNC. Drew helps someone cut out an amazingly figured clock on his OneFinity. Plus, a ton more!
 
 GIVEAWAY ANNOUNCEMENT!
Listen for details about our December giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway!
 
 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing
 
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
 
 -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 
 Become a patron of the show!
 http://patreon.com/webuiltathing
 
 OUR TOP PATREON SUPPORTERS
 -Tim Morrill
 -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
 -Brent Jarvis https://bit.ly/2OJL7EV
 -Ray Jolliff
 -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
 -Henry Lootens (@Manfaritawood)
 -Chris Simonton
 -Maddux Woodworks http://bit.ly/3chHe2p
 -Byrom’s Custom Woodworks
 -Bruce Clark
 -Will White
 -Cody Elkins (creator of the Jenny Bit)
 -Andy @ Mud Turtle Woodworks
 -Damon Moran
 -Monkey Business Woodworks
 -Rich from Woodnote Studio
 -AC Nailed It
 -Joe Santos from Designer's Touch Kitchen & Bath Studio
 -Aaron Yelton
 -Chad Green
 -Ryan Talley
 -Trevor
 -Mark Herrick @ Empty Nest Woodworks
 -Not That Aaron, the other one
 
 Support our sponsors:
 
TOOL CODES:
 -MagSwitch: “WBAT”
 -SurfPrep: “FISHER10”
 -Bumblechutes: “FISHER10”
 -Starbond: “BRUCEAULRICH”
 -Brunt Workgear: “GUNFLINT10”
 -Rotoboss: “GUNFLINT”
 -Merlin Moisture Meters: “FISHER10”
 -Montana Brand Tools: “GUNFLINT10”
 -Monport: “GUNFLINT6”
 -Stone Coat Epoxy: Gunflint
 -MAS Epoxy: FLINT
 -YesWelder: GUNFLINT10
 -Millner-Haufen Tool Co: “ULRICH20” for 20% off
 -SmartSquareTools.com: “FISHER10”
 -Camel City Mill: GUNFLINT10
 -Arbortech Tools: “BRUCEAULRICH” for 10% off
 -HighCountryTool.com: “FISHER10” for 10% off
 -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
 
 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
 https://amzn.to/2GP04jf 
 https://amzn.to/2TUrCr2
 
 ETSY SHOPS:
 Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
 
 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
 
 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
 
 Bruce's most recent video:
 https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
 
 Drew's most recent video:
 https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
 
 Mark's most recent video:
 https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
 
 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
 WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
 FISHER'S SHOP: www.instagram.com/fishersshop/
 BRUDADDY: www.instagram.com/brudaddy/
 GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
 
Music by: Jay Fisher (Thanks, Jay!)

283 - Router Table Rocket

In this episode, Mark quizes the guys with another round of trivia...Drew tries to redeem himself. Bruce talks about snacks he can't resist around Christmas time and going to see The Grinch in the theater with the family. Drew has the first 3D printing failure. Plus, a ton more!
 
 GIVEAWAY ANNOUNCEMENT!
Listen for details about our December giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway!
 
 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing
 
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
 
 -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 
 Become a patron of the show!
 http://patreon.com/webuiltathing
 
 OUR TOP PATREON SUPPORTERS
 -Tim Morrill
 -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
 -Brent Jarvis https://bit.ly/2OJL7EV
 -Ray Jolliff
 -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
 -Henry Lootens (@Manfaritawood)
 -Chris Simonton
 -Maddux Woodworks http://bit.ly/3chHe2p
 -Byrom’s Custom Woodworks
 -Bruce Clark
 -Will White
 -Cody Elkins (creator of the Jenny Bit)
 -Andy @ Mud Turtle Woodworks
 -Damon Moran
 -Monkey Business Woodworks
 -Rich from Woodnote Studio
 -AC Nailed It
 -Joe Santos from Designer's Touch Kitchen & Bath Studio
 -Aaron Yelton
 -Chad Green
 -Ryan Talley
 -Trevor
 -Mark Herrick @ Empty Nest Woodworks
 -Not That Aaron, the other one
 
 Support our sponsors:
 
TOOL CODES:
 -MagSwitch: “WBAT”
 -SurfPrep: “FISHER10”
 -Bumblechutes: “FISHER10”
 -Starbond: “BRUCEAULRICH”
 -Brunt Workgear: “GUNFLINT10”
 -Rotoboss: “GUNFLINT”
 -Merlin Moisture Meters: “FISHER10”
 -Montana Brand Tools: “GUNFLINT10”
 -Monport: “GUNFLINT6”
 -Stone Coat Epoxy: Gunflint
 -MAS Epoxy: FLINT
 -YesWelder: GUNFLINT10
 -Millner-Haufen Tool Co: “ULRICH20” for 20% off
 -SmartSquareTools.com: “FISHER10”
 -Camel City Mill: GUNFLINT10
 -Arbortech Tools: “BRUCEAULRICH” for 10% off
 -HighCountryTool.com: “FISHER10” for 10% off
 -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
 
 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
 https://amzn.to/2GP04jf 
 https://amzn.to/2TUrCr2
 
 ETSY SHOPS:
 Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
 
 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
 
 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
 
 Bruce's most recent video:
 https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
 
 Drew's most recent video:
 https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
 
 Mark's most recent video:
 https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
 
 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
 WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
 FISHER'S SHOP: www.instagram.com/fishersshop/
 BRUDADDY: www.instagram.com/brudaddy/
 GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
 
Music by: Jay Fisher (Thanks, Jay!)

284 - 5W30...Why Do You Hurt Me?

In this episode, Mark floods his house with a Christmas tree. Bruce surprises Rebecca. Drew goes tropical. Plus, a ton more!
 
 GIVEAWAY ANNOUNCEMENT!
Listen for details about our January giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway!
 
 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing
 
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
 
 -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 
 Become a patron of the show!
 http://patreon.com/webuiltathing
 
 OUR TOP PATREON SUPPORTERS
 -Tim Morrill
 -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
 -Brent Jarvis https://bit.ly/2OJL7EV
 -Ray Jolliff
 -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
 -Henry Lootens (@Manfaritawood)
 -Chris Simonton
 -Maddux Woodworks http://bit.ly/3chHe2p
 -Byrom’s Custom Woodworks
 -Bruce Clark
 -Will White
 -Cody Elkins (creator of the Jenny Bit)
 -Andy @ Mud Turtle Woodworks
 -Damon Moran
 -Monkey Business Woodworks
 -Rich from Woodnote Studio
 -AC Nailed It
 -Joe Santos from Designer's Touch Kitchen & Bath Studio
 -Aaron Yelton
 -Chad Green
 -Ryan Talley
 -Trevor
 -Mark Herrick @ Empty Nest Woodworks
 -Not That Aaron, the other one
 
 Support our sponsors:
 
TOOL CODES:
 -MagSwitch: “WBAT”
 -SurfPrep: “FISHER10”
 -Bumblechutes: “FISHER10”
 -Starbond: “BRUCEAULRICH”
 -Brunt Workgear: “GUNFLINT10”
 -Rotoboss: “GUNFLINT”
 -Merlin Moisture Meters: “FISHER10”
 -Montana Brand Tools: “GUNFLINT10”
 -Monport: “GUNFLINT6”
 -Stone Coat Epoxy: Gunflint
 -MAS Epoxy: FLINT
 -YesWelder: GUNFLINT10
 -Millner-Haufen Tool Co: “ULRICH20” for 20% off
 -SmartSquareTools.com: “FISHER10”
 -Camel City Mill: GUNFLINT10
 -Arbortech Tools: “BRUCEAULRICH” for 10% off
 -HighCountryTool.com: “FISHER10” for 10% off
 -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
 
 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
 https://amzn.to/2GP04jf 
 https://amzn.to/2TUrCr2
 
 ETSY SHOPS:
 Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
 
 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
 
 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
 
 Bruce's most recent video:
 https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
 
 Drew's most recent video:
 https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
 
 Mark's most recent video:
 https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
 
 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
 WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
 FISHER'S SHOP: www.instagram.com/fishersshop/
 BRUDADDY: www.instagram.com/brudaddy/
 GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
 
Music by: Jay Fisher (Thanks, Jay!)

285 - No Pee Pee in Sky

In this episode, Mark makes a swamp cooler cover for his brother. Bruce gets piled with snow. Drew cuts down a tree. Plus, a ton more!
 
 GIVEAWAY ANNOUNCEMENT!
Listen for details about our January giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway!
 
 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing
 
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
 
 -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 
 Become a patron of the show!
 http://patreon.com/webuiltathing
 
 OUR TOP PATREON SUPPORTERS
 -Tim Morrill
 -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
 -Brent Jarvis https://bit.ly/2OJL7EV
 -Ray Jolliff
 -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
 -Henry Lootens (@Manfaritawood)
 -Chris Simonton
 -Maddux Woodworks http://bit.ly/3chHe2p
 -Byrom’s Custom Woodworks
 -Bruce Clark
 -Will White
 -Cody Elkins (creator of the Jenny Bit)
 -Andy @ Mud Turtle Woodworks
 -Damon Moran
 -Monkey Business Woodworks
 -Rich from Woodnote Studio
 -AC Nailed It
 -Joe Santos from Designer's Touch Kitchen & Bath Studio
 -Aaron Yelton
 -Chad Green
 -Ryan Talley
 -Trevor
 -Mark Herrick @ Empty Nest Woodworks
 -Not That Aaron, the other one
 
 Support our sponsors:
 
TOOL CODES:
 -MagSwitch: “WBAT”
 -SurfPrep: “FISHER10”
 -Bumblechutes: “FISHER10”
 -Starbond: “BRUCEAULRICH”
 -Brunt Workgear: “GUNFLINT10”
 -Rotoboss: “GUNFLINT”
 -Merlin Moisture Meters: “FISHER10”
 -Montana Brand Tools: “GUNFLINT10”
 -Monport: “GUNFLINT6”
 -Stone Coat Epoxy: Gunflint
 -MAS Epoxy: FLINT
 -YesWelder: GUNFLINT10
 -Millner-Haufen Tool Co: “ULRICH20” for 20% off
 -SmartSquareTools.com: “FISHER10”
 -Camel City Mill: GUNFLINT10
 -Arbortech Tools: “BRUCEAULRICH” for 10% off
 -HighCountryTool.com: “FISHER10” for 10% off
 -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
 
 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
 https://amzn.to/2GP04jf 
 https://amzn.to/2TUrCr2
 
 ETSY SHOPS:
 Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
 
 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
 
 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
 
 Bruce's most recent video:
 https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
 
 Drew's most recent video:
 https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
 
 Mark's most recent video:
 https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
 
 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
 WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
 FISHER'S SHOP: www.instagram.com/fishersshop/
 BRUDADDY: www.instagram.com/brudaddy/
 GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
 
Music by: Jay Fisher (Thanks, Jay!)

286 - A Jolly Swamp Cooler

In this episode, Mark erradicates radon. Bruce bakes a loaf of bread. Drew gets an interesting comment on a sale on Etsy. Plus, a ton more!
 
 GIVEAWAY ANNOUNCEMENT!
Listen for details about our January giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway!
 
 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing
 
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
 
 -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 
 Become a patron of the show!
 http://patreon.com/webuiltathing
 
 OUR TOP PATREON SUPPORTERS
 -Tim Morrill
 -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
 -Ray Jolliff
 -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
 -Henry Lootens (@Manfaritawood)
 -Chris Simonton
 -Maddux Woodworks http://bit.ly/3chHe2p
 -Bruce Clark
 -Will White
 -Cody Elkins (creator of the Jenny Bit)
 -Andy @ Mud Turtle Woodworks
 -Damon Moran
 -Monkey Business Woodworks
 -Rich from Woodnote Studio
 -AC Nailed It
 -Joe Santos from Designer's Touch Kitchen & Bath Studio
 -Chad Green
 -Trevor
 -Mark Herrick @ Empty Nest Woodworks
 -Not That Aaron, the other one
 
 Support our sponsors:
 
TOOL CODES:
 -MagSwitch: “WBAT”
 -SurfPrep: “FISHER10”
 -Bumblechutes: “FISHER10”
 -Starbond: “BRUCEAULRICH”
 -Brunt Workgear: “GUNFLINT10”
 -Rotoboss: “GUNFLINT”
 -Merlin Moisture Meters: “FISHER10”
 -Montana Brand Tools: “GUNFLINT10”
 -Monport: “GUNFLINT6”
 -Stone Coat Epoxy: Gunflint
 -MAS Epoxy: FLINT
 -YesWelder: GUNFLINT10
 -Millner-Haufen Tool Co: “ULRICH20” for 20% off
 -SmartSquareTools.com: “FISHER10”
 -Camel City Mill: GUNFLINT10
 -Arbortech Tools: “BRUCEAULRICH” for 10% off
 -HighCountryTool.com: “FISHER10” for 10% off
 -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
 
 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
 https://amzn.to/2GP04jf 
 https://amzn.to/2TUrCr2
 
 ETSY SHOPS:
 Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
 
 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
 
 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
 
 Bruce's most recent video:
 https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
 
 Drew's most recent video:
 https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
 
 Mark's most recent video:
 https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
 
 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
 WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
 FISHER'S SHOP: www.instagram.com/fishersshop/
 BRUDADDY: www.instagram.com/brudaddy/
 GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
 
Music by: Jay Fisher (Thanks, Jay!)

287 - Radon Bath House

In this episode, Mark fells a split ash tree. Bruce rants about delivery. Drew buys a new camera. Plus, a ton more!
 
 GIVEAWAY ANNOUNCEMENT!
Listen for details about our January giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway!
 
 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing
 
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
 
 -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 
 Become a patron of the show!
 http://patreon.com/webuiltathing
 
 OUR TOP PATREON SUPPORTERS
 -Tim Morrill
 -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
 -Ray Jolliff
 -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
 -Henry Lootens (@Manfaritawood)
 -Chris Simonton
 -Maddux Woodworks http://bit.ly/3chHe2p
 -Bruce Clark
 -Will White
 -Cody Elkins (creator of the Jenny Bit)
 -Andy @ Mud Turtle Woodworks
 -Damon Moran
 -Monkey Business Woodworks
 -Rich from Woodnote Studio
 -AC Nailed It
 -Joe Santos from Designer's Touch Kitchen & Bath Studio
 -Chad Green
 -Trevor
 -Mark Herrick @ Empty Nest Woodworks
 -Not That Aaron, the other one
 
 Support our sponsors:
 
TOOL CODES:
 -MagSwitch: “WBAT”
 -SurfPrep: “FISHER10”
 -Bumblechutes: “FISHER10”
 -Starbond: “BRUCEAULRICH”
 -Brunt Workgear: “GUNFLINT10”
 -Rotoboss: “GUNFLINT”
 -Merlin Moisture Meters: “FISHER10”
 -Montana Brand Tools: “GUNFLINT10”
 -Monport: “GUNFLINT6”
 -Stone Coat Epoxy: Gunflint
 -MAS Epoxy: FLINT
 -YesWelder: GUNFLINT10
 -Millner-Haufen Tool Co: “ULRICH20” for 20% off
 -SmartSquareTools.com: “FISHER10”
 -Camel City Mill: GUNFLINT10
 -Arbortech Tools: “BRUCEAULRICH” for 10% off
 -HighCountryTool.com: “FISHER10” for 10% off
 -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
 
 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
 https://amzn.to/2GP04jf 
 https://amzn.to/2TUrCr2
 
 ETSY SHOPS:
 Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
 
 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
 
 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
 
 Bruce's most recent video:
 https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
 
 Drew's most recent video:
 https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
 
 Mark's most recent video:
 https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
 
 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
 WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
 FISHER'S SHOP: www.instagram.com/fishersshop/
 BRUDADDY: www.instagram.com/brudaddy/
 GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
 
Music by: Jay Fisher (Thanks, Jay!)

288 - The Dead Pixels

In this episode, Mark made his dog kennel live. Bruce did a woodworking. Drew is making more tool holders, but with a Sword in the Stone twist. Plus, a ton more!
 
 GIVEAWAY ANNOUNCEMENT!
Listen for details about our January giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Titebond for sponsoring this giveaway!
 
 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing
 
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
 
 -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 
 Become a patron of the show!
 http://patreon.com/webuiltathing
 
 OUR TOP PATREON SUPPORTERS
 -Tim Morrill
 -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
 -Ray Jolliff
 -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
 -Henry Lootens (@Manfaritawood)
 -Chris Simonton
 -Maddux Woodworks http://bit.ly/3chHe2p
 -Bruce Clark
 -Will White
 -Cody Elkins (creator of the Jenny Bit)
 -Andy @ Mud Turtle Woodworks
 -Damon Moran
 -Monkey Business Woodworks
 -Rich from Woodnote Studio
 -AC Nailed It
 -Joe Santos from Designer's Touch Kitchen & Bath Studio
 -Chad Green
 -Trevor
 -Mark Herrick @ Empty Nest Woodworks
 -Not That Aaron, the other one
 
 Support our sponsors:
 
TOOL CODES:
 -MagSwitch: “WBAT”
 -SurfPrep: “FISHER10”
 -Bumblechutes: “FISHER10”
 -Starbond: “BRUCEAULRICH”
 -Brunt Workgear: “GUNFLINT10”
 -Rotoboss: “GUNFLINT”
 -Merlin Moisture Meters: “FISHER10”
 -Montana Brand Tools: “GUNFLINT10”
 -Monport: “GUNFLINT6”
 -Stone Coat Epoxy: Gunflint
 -MAS Epoxy: FLINT
 -YesWelder: GUNFLINT10
 -Millner-Haufen Tool Co: “ULRICH20” for 20% off
 -SmartSquareTools.com: “FISHER10”
 -Camel City Mill: GUNFLINT10
 -Arbortech Tools: “BRUCEAULRICH” for 10% off
 -HighCountryTool.com: “FISHER10” for 10% off
 -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
 
 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
 https://amzn.to/2GP04jf 
 https://amzn.to/2TUrCr2
 
 ETSY SHOPS:
 Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
 
 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
 
 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
 
 Bruce's most recent video:
 https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
 
 Drew's most recent video:
 https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
 
 Mark's most recent video:
 https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
 
 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
 WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
 FISHER'S SHOP: www.instagram.com/fishersshop/
 BRUDADDY: www.instagram.com/brudaddy/
 GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
 
Music by: Jay Fisher (Thanks, Jay!)

289 - Cilantro & Diet Tomatoes

In this episode, Mark makes some progress on the hidden door. Bruce tweaks a large rolling storage shelf. Drew is finishing up with more fancy tool holders with a video to come soon. Plus, a ton more!
 
 GIVEAWAY ANNOUNCEMENT!
Listen for details about our February giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Serious Grit for sponsoring this giveaway!
 
 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing
 
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
 
 -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 
 Become a patron of the show!
 http://patreon.com/webuiltathing
 
 OUR TOP PATREON SUPPORTERS
 -Tim Morrill
 -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
 -Ray Jolliff
 -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
 -Henry Lootens (@Manfaritawood)
 -Chris Simonton
 -Maddux Woodworks http://bit.ly/3chHe2p
 -Bruce Clark
 -Will White
 -Cody Elkins (creator of the Jenny Bit)
 -Andy @ Mud Turtle Woodworks
 -Damon Moran
 -Monkey Business Woodworks
 -Rich from Woodnote Studio
 -AC Nailed It
 -Joe Santos from Designer's Touch Kitchen & Bath Studio
 -Chad Green
 -Trevor
 -Mark Herrick @ Empty Nest Woodworks
 -Not That Aaron, the other one
 
 Support our sponsors:
 
TOOL CODES:
 -MagSwitch: “WBAT”
 -SurfPrep: “FISHER10”
 -Bumblechutes: “FISHER10”
 -Starbond: “BRUCEAULRICH”
 -Brunt Workgear: “GUNFLINT10”
 -Rotoboss: “GUNFLINT”
 -Merlin Moisture Meters: “FISHER10”
 -Montana Brand Tools: “GUNFLINT10”
 -Monport: “GUNFLINT6”
 -Stone Coat Epoxy: Gunflint
 -MAS Epoxy: FLINT
 -YesWelder: GUNFLINT10
 -Millner-Haufen Tool Co: “ULRICH20” for 20% off
 -SmartSquareTools.com: “FISHER10”
 -Camel City Mill: GUNFLINT10
 -Arbortech Tools: “BRUCEAULRICH” for 10% off
 -HighCountryTool.com: “FISHER10” for 10% off
 -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
 
 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
 https://amzn.to/2GP04jf 
 https://amzn.to/2TUrCr2
 
 ETSY SHOPS:
 Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
 
 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
 
 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
 
 Bruce's most recent video:
 https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
 
 Drew's most recent video:
 https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
 
 Mark's most recent video:
 https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
 
 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
 WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
 FISHER'S SHOP: www.instagram.com/fishersshop/
 BRUDADDY: www.instagram.com/brudaddy/
 GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
 
Music by: Jay Fisher (Thanks, Jay!)

290 - Rusty Mud Water

In this episode, Mark gets to read in peace. Drew loves snow-blowing. Bruce sweats in an attic. . Plus, a ton more!
 
 GIVEAWAY ANNOUNCEMENT!
Listen for details about our February giveaway. Get entered and there are even ways to earn bonus entries. Details in the episode. Thanks to Serious Grit for sponsoring this giveaway!
 
 T-shirts: https://fishersshoponline.com/merch & https://www.bruceaulrich.com/shop/clothing
 
SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON
 
 -This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 
 Become a patron of the show!
 http://patreon.com/webuiltathing
 
 OUR TOP PATREON SUPPORTERS
 -Tim Morrill
 -Scott @ Dad It Yourself DIY http://bit.ly/3vcuqmv
 -Ray Jolliff
 -Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
 -Henry Lootens (@Manfaritawood)
 -Chris Simonton
 -Maddux Woodworks http://bit.ly/3chHe2p
 -Bruce Clark
 -Will White
 -Cody Elkins (creator of the Jenny Bit)
 -Andy @ Mud Turtle Woodworks
 -Damon Moran
 -Monkey Business Woodworks
 -Rich from Woodnote Studio
 -AC Nailed It
 -Joe Santos from Designer's Touch Kitchen & Bath Studio
 -Chad Green
 -Trevor
 -Mark Herrick @ Empty Nest Woodworks
 -Not That Aaron, the other one
 
New:
 -Kevin Johnston
 
 Support our sponsors:
 
TOOL CODES:
 -MagSwitch: “WBAT”
 -SurfPrep: “FISHER10”
 -Bumblechutes: “FISHER10”
 -Starbond: “BRUCEAULRICH”
 -Brunt Workgear: “GUNFLINT10”
 -Rotoboss: “GUNFLINT”
 -Merlin Moisture Meters: “FISHER10”
 -Montana Brand Tools: “GUNFLINT10”
 -Monport: “GUNFLINT6”
 -Stone Coat Epoxy: Gunflint
 -MAS Epoxy: FLINT
 -YesWelder: GUNFLINT10
 -Millner-Haufen Tool Co: “ULRICH20” for 20% off
 -SmartSquareTools.com: “FISHER10”
 -Camel City Mill: GUNFLINT10
 -Arbortech Tools: “BRUCEAULRICH” for 10% off
 -HighCountryTool.com: “FISHER10” for 10% off
 -Wagner Meters: https://www.wagnermeters.com/shop/orion-950-smart/?ref=210
 
 We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
 https://amzn.to/2GP04jf 
 https://amzn.to/2TUrCr2
 
 ETSY SHOPS:
 Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486
 
 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766
 
 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect
 
 Bruce's most recent video:
 https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz
 
 Drew's most recent video:
 https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV
 
 Mark's most recent video:
 https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL
 
 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US:
 WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
 FISHER'S SHOP: www.instagram.com/fishersshop/
 BRUDADDY: www.instagram.com/brudaddy/
 GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
 
Music by: Jay Fisher (Thanks, Jay!)

291 - Swords In Turds

In this episode, Bruce talks about using India ink to ebonize the legs of the live edge desk he made, Mark impresses his general contractor father-in-law with a sprayer and Drew talks about the technique of creating the chocolate cake box and more about the charity for which he made it, Beads of Courage. 
 
Big thanks to Earlex, our sponsor for this episode! Our listeners can save $50 on the Earlex 6003 by using the link below from now through the end of December 2019:
 https://amzn.to/2W5IPzV

 
Keep up with Earlex on Instagram: @Earlex_Woodworking
 
NOTES:
 
SUPPORT THE SHOW:
 www.patreon.com/webuiltathing
 
Head over to www.patreon.com/webuiltathing and consider supporting the show. We have lots of great rewards! 
 
We Built A Thing T-shirts! We have two designs to choose from!
 https://amzn.to/2GP04jf 
 https://amzn.to/2TUrCr2
 
Bruce's most recent video:
 https://youtu.be/K5gpqSqUva8
 

 Drew's most recent video:
 https://youtu.be/SiO0u9ppz2Q
 

 Mark's most recent video:
 https://youtu.be/A-W2Qa2Jsbo
 

 OTHER STUFF MENTIONED:
 -Earlex sprayers
 -Beads of Courage charity:
 http://www.beadsofcourage.org/about-beads-of-courage/
 -Stephanie @UncommonOutpost
 
We are all part-time makers, full-time dads and all have YouTube channels we are trying to grow.
 
Throughout this podcast, we plan to talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. 
 
CONNECT WITH US:
 WE BUILT A THING: www.instagram.com/webuiltathing/
 FISHER'S SHOP: www.instagram.com/fishersshop/
 BRUDADDY: www.instagram.com/brudaddy/
 GUNFLINT DESIGNS: www.instagram.com/gunflint_designs/
 
Music by: Jay Fisher (Thanks, Jay!)

034 - India Ink, House-worthy Shop Furniture and Chocolate Cake Boxes

Lyt når som helst, hvor som helst

Other podcasts you might like ...